|
|
 Planet Technology WNAP-7206 |
|
|
 |
 |
| Hardware > Redes >
Wireless > Puntos-de-Acceso-Exterior > Planet-Technology >
WNAP-7206
|
|
| 5GHz 802.11a/n Wireless Outdoor Access Point, 150Mbps |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
High Power Outdoor Wireless Coverage
PLANET Technology introduces the latest high power outdoor wireless LAN solution - the outdoor wireless AP, WNAP-7206. It provides higher transmit power, better performance, and widely coverage than standard outdoor wireless AP. The WNAP-7206 is compatible with IEEE 802.11a/n standard supporting the data rate up to 150Mbps in 802.11n mode. The WNAP-7206 not only has built-in 15dBi panel Antenna but also reserves one RP-SMA Type Antenna Connector to allow versatile antenna installations and multiple adjustable transmit output power controller. Therefore, the WNAP-7206 is quite suitable for widely open space applications.
Multiple Operating & Wireless Modes
The WNAP-7206 supports multiple wireless communication connectivity (AP / Client CPE / WDS PtP / WDS PtMP / Repeater / Universal Repeater) allowing for various application requirements and thus it gives users more comprehensive experience when using the WNAP-7206. It helps users to easily build a wireless network and extend the wireless range of existing wireless network.
The WNAP-7206 also supports WISP mode, so CPE users could easily connect to Internet via WISP provider or connect to a wired network.
Advanced Security and Management
In aspect of security, besides 64/128/152-bit WEP encryption, the WNAP-7206 integrates WPA / WPA2, WPA-PSK / WPA2-PSK to secure and protect your wireless LAN. The wireless MAC filtering and SSID broadcast control consolidate the wireless network security and prevent unauthorized wireless connection. To fulfill enterprise and various applications demand, the WNAP-7206 enhances security and management features such as multiple SSID support. It can create up to 4 virtual standalone AP with 4 different SSID according to individual security level and encryption scheme of various wireless devices.
Highly Reliable Outdoor Device
The WNAP-7206 is perfectly suitable to be installed in outdoor environments and exposed locations. Its built-in 15KV ESD and 4000V lightning protection can withstand storm and prevent damage from lightning surges. Furthermore, the WNAP-7206 can perform stably under rigorous weather conditions including heavy rain and wind by its Outdoor Weatherproof case protection. With the proprietary Power over Ethernet (PoE) design, the WNAP-7206 can be easily applied in any area where power outlets are not available. It is the best way using the WNAP-7206 to build outdoor wireless access applications between buildings on campuses, business, rural areas and etc.
Easy Installation & Management
With User-friendly Web UI and step by step Setup Wizard, the WNAP-7206 is easier to install, even for users who never experience setting up a wireless network. Furthermore, with SNMP-Based management interface, the WNAP-7206 is convenient to be managed and configured remotely.
Longer distance coverage between LAN connections
The WNAP-7206 is a cost-effective outdoor wireless solution for widely open space applications. It is best suitable for outdoor wireless connections between buildings.
With built-in RP-SMA Type Antenna connector, the WNAP-7206 brings higher coverage and longer distance of wireless connection. The WNAP-7206 provides high output power with multiple adjust Tx controller, which allows CPE users to easily install and adjust the suitable value in appropriate locations. The WISP mode supported also enables CPE users to connect to Internet via local WISP provider. |
|
| Especificaciones |
|
HARDWARE
Standard compliance
IEEE 802.11a/n
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
Memory
32 Mbytes DDR SDRAM
4 Mbytes Flash
Button Reset Button x 1
LED Provides 4-Level signal LED indicator
PoE Passive PoE (Up to 60 meters)
Interface
Wireless IEEE 802.11a/n
LAN / WAN: 10/100Base-TX, Auto-MDI/MDIX x 1
Grounding Terminal x 1
Antenna
Internal (Default): 15dBi directional antenna (Dual-Polarization)
■ Horizontal: 60 degree
■ Vertical: 14 degree
External (Option): RP-SMA Female type Connector
■ Switchable by Software
■ For External Antenna Mode, attach antenna before
power on.
Data Rate
802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
802.11n (20MHz): up to 72Mbps
802.11n (40MHz): up to 150Mbp
Media Access Control CSMA / CA
Modulation
Transmission / Emission Type: OFDM
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band 5.180-5.240GHz; 5.745-5.825GHz
Operating Channel
5.180GHz-CH36
5.200GHz-CH40
5.220GHz-CH44
5.240GHz-CH48
5.745GHz-CH149
5.765GHz-CH153
5.785GHz-CH157
5.805GHz-CH161
5.825GHz-CH165
* The actual channels will vary depends on the regulation in different
regions and countries.
RF Output Power
802.11a: 27 ± 1dBm
802.11n: 24 ± 1dBm
Receiver Sensitivity
802.11a
54M: -77dBm
48M: -79dBm
36M: -83dBm
24M: -86dBm
18M: -91dBm
12M: -92dBm
9M: -93dBm
6M: -94dBm
802.11n
150M: -73dBm
121.5M: -76dBm
108M: -77dBm
81M: -81dBm
54M: -84dBm
40.5M: -88dBm
27M: -91dBm
13.5M: -93dBm
Output Power Control
High (default)
Middle
Low
Power Requirements
Passive PoE 12V
Pin 4,5 VDC+
Pin 7,8 VDC-
Power Adapter 12V DC, 1A (switching)
ENVIRONMENT & CERTIFICATION
Temperature
Operation: -30~70 Degree C
Storage: -40~70% Degree C
Humidity
Operating: 10~90% non-condensing
Storage: 5~95% non-condensing
Enclosure
Outdoor Weatherproof design
15KV ESD & 4000V Lightning Protection
Grounding Terminal Integrated
Regulatory CE / FCC / RoHS
SOFTWARE
LAN
■ Built-in DHCP server supporting static IP address distributing
■ Supports UPnP, Dynamic DNS
■ Supports Flow Statistics
■ IP & MAC Binding
■ IP / Protocol-based Bandwidth Control
WAN
■ Static IP
■ Dynamic IP
■ PPPoE / Russia PPPoE
■ PPTP / Russia PPTP
■ L2TP / Russia L2TP
■ BigPond Cable
VPN Passthrough
■ PPTP
■ L2TP
■ IPSec
Operating Mode
■ Standard AP (Wireless AP)
■ AP Router (Wireless Broadband Router)
■ AP Client Router (WISP Client Router)
Firewall
■ NAT firewall with SPI (Stateful Packet Inspection)
■ NAT with ALG (Application Layer Gateway)
■ Built-in NAT server supporting Port Triggering, Virtual Server,
and DMZ
■ Built-in firewall with IP address / MAC / DNS filtering
■ Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter,
DoS protection
Wireless Mode
■ AP
■ Client
■ WDS PTP
■ WDS PTMP
■ WDS Repeater (AP+WDS)
■ Universal Repeater (AP+Client)
Channel Width 20MHz / 40MHz
Wireless Isolation Enable to isolate each connected wireless clients
Wireless Security
64/128/152-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Wireless MAC address filtering
Enable/Disable SSID Broadcast
Multiple SSID Up to 3
Max. Wireless Client 25
Max. WDS AP 4
Max. Wired Client 60
WMM Supports Wi-Fi Multimedia
NTP Network Time Management
Management
Web-Based (HTTP) management interface
Supports SNMP v1/v2 agent with MIB-II
Remote management
SNTP time synchronize
Easy firmware upgrade
Configuration Backup & Restore
DHCP Client List
Diagnostic tool
■ System Log supports auto mail and save to local host
■ Ping Watch Dog allows you to continuously monitor the particular
connection between the device and a remote host.
■ Throughput Monitor provides real-time wireless throughput
information
■ Speed Test helps to test the connection speed
ACCESSORIES
CB-STP-25 25 Meters STP Cat5 Cable
ELA-100 Ethernet Lightning Arrest Box
ANT-OM10A 5GHz 10dBi Omni-Directional Antenna
ANT-FP18A 5GHz 18dBi Flat Panel Directional Antenna
ANT-FP23A 5GHz 23dBi Flat Panel Directional Antenna
ANT-SE17A 5GHz 16.5dBi Sector Antenna
ANT-SE21A 5GHz 21dBi Sector Antenna
WL-SMA-0.6 0.6M RP-SMA(M) to N(M) Cable
WL-SMA-6 6M RP-SMA(M) to N(M) Cable
WL-LTNA 2.4/5GHz Lightning Arrester (N-male to N-female) |
|
|
| |
|
|
|
