Sistematics:Comprar material inform�tico, audiovisual y de telecomunicaciones con las mayores garant�as
Esta web utiliza cookies propias y de terceros para optimizar su visita. Por favor, acepte su uso. Pol�tica de cookies, aqu�
Si continua navegando est� acept�ndola
The Annuncicom 100 is a versatile Audio over IP device designed to serve as a gateway between IP Paging, VoIP and Intercom systems and traditional microphone/speakers or amplifers. Supporting both music (MP3) as well as voice codecs (G.711,G.722) and a large number of protocols (including shoutcast, SIP etc), the device can be used for both background music as well as VoIP applications.
Applications VHF Radio Controller and interface to IP
Microphone Encoder for IP Audio Surveillance
Door Intercom Controller, VoIP based
Help Point/SOS call box device
Classroom VoIP device with built-in amplifier, talkback, serial port
Paging and Audio Distribution with Amplifier control and monitoring
Live IP Audio Encoder for Streaming Applications
Generic, bidirectional full-duplex VoIP module for Paging and Intercom applications
Digital Annunciator, Message Player, Message Repeater
SIP and IP Paging Zone Device
FEATURES G711, G.722, PCM Encoding
MP3 Encoding (low Latency)
AACplus, MP3, Ogg Vorbis, G.711, G.722, PCM decoding
Shoutcast/Icecast Source capability
Audio Level Supervision with SNMP Trap generation
IP Streaming via TCP, UDP, RTP, Multicast
Microphone Input
Line Level Input
Line Level Output
Amplified Output 2W (8 Ohm)
Relay Output (1)
Contact Closure Input (2)
RS-232 Serial Port (1)
RS-485 Serial Port (1)
Power Supply (12V, included)
Designed in Switzerland and being used in thousands of mission critical paging and intercom applications, the Barix Annuncicom series is the product of choice for IP based Paging, Intercom and VoIP applications worldwide.
Especificaciones
Electrical • 9 to 30 VDC, 12 to 24 VAC, 8 Watt max. on screw terminal block and 2.1mm barrel connector
Ethernet • 10/100Mbps auto,
• RJ-45 connector with integrated Link/Activity LED
• Protocols: TCP/IP, UDP, RTP, SIP, DHCP, Multicast capable
Microphone Input • On detachable screw terminal block and 3.5 mm (1/8") Jack
• 3 pin TRS, with bias power 2.7VDC
Analog Line Input (mono) • Line level input, 2k Ohm input impedance on RCA 2.2 VPP max, adjustable in sensitivity
• Frequency response 20 Hz .. 20 kHz (-3dB)*
• Dynamic range 87 dB, SNR -87 dB, THD <0.01% (-3dBFS)*
RS-232 and RS-485 Interfaces • On 9-pin Sub-D connector
• 300..230'400 Baud asynchronous, tunneling or local control
MTBF • calculation 560 000h (according to MIL217F at 25°C)
Mechanical • Aluminum case, 390 g
• Dimensions 108 x 38 x 125 mm (4.25 x 1.5 x 4.92 inch)
• rack and wall mountable using accessories
* depends on used codec, best results @48kHz PCM
Analog Line Output (mono)
• Line level output, 40..60 Ohm output impedance on RCA
• Output level software controllable
• Full scale output voltage: 3 dBu, 3 VPP
• Frequency response 20 Hz .. 20 kHz (-3dB)*
• Dynamic range 94 dB, SNR -94 dB, THD <0.03 % (-3dBFS)*
Speaker out • On detachable screw terminal block
• Suggested speaker impedance 4 to 32 Ohm
• 1 Watt max @ 8 Ohm (2 W max @ 4 Ohm)
• Frequency response 20 Hz .. 20 kHz (-3dB)*,
• Dynamic range 80dB, SNR -80dB, THD <0.15% (-3dBFS)*
Audio formats • MP3, encoding/decoding up to 192/320 kbps
• PCM 16 bit and 8 bit (uLaw, aLaw) @ 8..48 kHz
• MP3, VBR, CBR VBR, CBR encoding/decoding
• PCM, G.711, G.722 encoding/decoding
• Ogg Vorbis, AAC+ decoding
Model comparison • Model 60 (48 VDC) , PoE, 5 Watt
• Model 100 (9..30 VDC 12..24 VAC) USB 2 Watt
• Model 155 (24..48 VDC) 5.5 Watt
• Model 200 (16..30 VDC, 48 VDC, 16..24 VAC) PoE, USB, Aipohne 8 Watt
• Model 1000 (24..48 VDC)
Discrete I/O • On detachable screw terminal block
• 1 relay output with normally closed and open contacts,
• 30V 0.5A (AC & DC)
• 2 discrete / dry contact inputs