|
|
 Apro SBMIF512M-HACSC-4R-P |
|
|
 |
 |
| Hardware > Almacenamiento >
Memorias-Flash > Industriales:-Micro-IDE-Flash-44pin-HR > Apro >
SBMIF512M-HACSC-4R-P
|
|
| Hermit Series Standard Grade 0ºC-70ºC PIO-4 mode/ 512MB |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 3 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
¡» Standard 44-pin female IDE connector
¡» Compact form-factor in horizontal rightward type
¡» Comply with ATA/ATAPI-6 specification
¡» Data transfer mode support PIO 0~6 and UDMA 0~5
¡» Options for standard grade and industrial grade
¡» Master / Slave selectable
¡» Performance up to 40MB/sec
¡» Disk capacity from 128MB to 16GB
|
|
| Especificaciones |
|
¡» Compatibility¡GATAPI-6 and True IDE mode
¡» Flash Technology¡GNAND type SLC flash based
¡» Form-factor¡GCompact-designing in vertical type and horizontal-rightward and leftward types
¡» Host Interface¡G44-pins female IDE interface
¡» Performance
¡´ Data transfer mode¡GPIO-4 mode or UDMA-4 mode (Default setting)
¡´ Data transfer rate¡G
- 66.6MB/sec under UDMA-4 mode
- 16.6MB/sec under PIO-4 mode
¡´ Sequential read¡G40 MB/sec (Max. /with dual flash)
¡´ Sequential write¡G17 MB/sec (Max. / with dual flash)
¡´ Average access time¡G0.2ms (estimated)
¡» Environmental specification
¡´ Operating temperature¡G
- Standard grade 0 degree ~ +70 degree
- Industrial grade -40 degree ~ +85 degree
¡´ Non-operating temperature¡G
- Standard grade -20 degree ~ +80 degree
- Industrial grade -50 degree ~ +95 degree
¡´ Humidity¡G10% ~ 95% non-condensing
¡´ Acoustic noise¡G0dB
¡´ Vibration¡G15G compliance to MIL-STD-810F
¡´ Shock¡G1,500G compliance to MIL-STD-810F
¡´ Altitude¡G70,000 feet
¡» Power consumption
¡´ Power requirement¡G+5V + 10% / +3.3V + 5%
¡´ Reading mode¡G1 Channel 69mA(Max.) / 2 Channel 128mA(Max.) UDMA4 Mode
¡´ Writing mode¡G1 Channel 48mA(Max.) / 2 Channel 118mA(Max.) UDMA4 Mode
¡´ Sleeping mode¡G1 Channel 1.2mA(Max.) / 2 Channel 1.8mA(Max.) UDMA4 Mode
¡» Reliability
¡´ Wear-leveling¡GStatic wear-leveling algorithms
¡´ MTBF¡G> 3,000,000 hours
¡´ ECC¡GEnhanced management 4-bits per 512bytes block
¡´ Endurance¡G> 2,000,000 cycles logically contributed by static wear-leveling and advanced
bad sector management algorithms
¡´ Data reliability¡G< 1 non-recoverable error in 1014 bits read
¡´ Data retention¡G10 years
¡» Physical specification
¡´ Weight (max.)¡G
- 44-pin horizontal type : 15g(0.53oz) / 10g(0.35oz)
¡´ Dimension(W x L x H)¡G
- 44-pin horizontal type: 48.00 x 32.60 x 4.50
¡» Conformal coating¡GOption for special request
|
|
|
|
|
|
|
| Precio: Llame para precio |
|
|
|
|
 |
 |
 |
 |
| Suscríbete a nuestro boletín informativo |
|
|
|
 |
 |
 |
 |
|
Ocasión
