|
|
 Allied Telesis AT-MC602 |
|
|
 |
 |
| Hardware > Redes >
Cobre > Convertidores-VDSL > Allied-Telesis >
AT-MC602
|
|
| Extended Ethernet over VDSL Provider Unit |
|
|
|
 |
|
 |
|
| Garantía del fabricante: 2 años SAT (Servicio Técnico) |
|
 Hoja de Datos |
|
Disponibilidad:  |
|
| |
|
| Características |
|
Extended Ethernet™ Operation
Used as a pair, the AT-MC601 and AT-MC602 provide over 10Mbps of symmetric data transfer, while supporting POTS service over phone-grade, twisted-pair, wiring (CAT1, 2, 3) at
distances up to 1.2Km or 4,000 feet.
They are the ideal solution for providing over 10Mbps operation on 'last-mile' twisted-pair circuits or existing in-building wiring.
Standard Ethernet operation is preserved endtoend, retaining VLAN tags, and Ethernet MAC information across the link, while higher layer protocols are passed transparently. 10Mbps
Ethernet operation is supported simultaneously with POTS, ISDN or PBX signalling, without disruption.
MTU and MDU Applications
Multi-Tenant Units (MTU) such as offices and campuses, and Multiple Dwelling Units (MDU) such as hotels and apartments are an ideal environment for the AT-MC601/2 network
extenders, where phone-grade wiring can be used to provide broadband access to Internet services including video streaming,WWW, gaming and e-mail.There is no need to re-wire
premises with expensive CAT5 or fiber to provide broadband Ethernet services.
Standalone and Rack-mount
The AT-MC602 provider unit is available as a compact standalone unit for installation at the central office, or alternatively, it can be rackmounted in the standard AT-MCR12 chassis from Allied Telesis, capable of housing up to twelve units in one compact chassis with a redundant power supply, simplifying wiring and
minimizing space requirements.
Plug and Play Operation
Simply connect to the RJ-45 Ethernet port and the unit will automatically auto-sense and configure for 10T or 10/100TX, as well as full or half-duplex Ethernet operation. An integral
POTS splitter means that existing phone services are not affected - no reconfiguration is required.
11Mbps full-duplex Ethernet operation up to 1.2Km or 4,000ft - symmetrical operation
Up to 25Mbps downstream asymmetrical operation
Traffic shaping upstream and downstream
Both symmetrical and asymmetrical operation
Operates over category 1,2,3 or 5 telephone quality cabling
10/100 Ethernet port
POTS port
Integral POTS splitter
Auto MDI/MDI-X
Power, Ethernet activity and link LEDs
VDSL error and link LEDs
GUI configuration tool
Standalone, rack-mountable and wallmountable
Software upgradable |
|
| Especificaciones |
|
Supports proposed 10S specification
QAM modulation
Spectrally compatible with ISDN and POTS services
FDD duplexing
Datarate 11Mbps full-duplex
64K EEPROM
Half/full-duplex
Auto-negotiation
Auto MDI/MDI-X
Speed/Distance
11Mbps at 1.2km, 4000ft symmetric
(Subject to cable type)
Front Panel Indicators
System power
Ethernet link
Ethernet activity
VDSL link
VDSL error
Interface Connections
VDSL interface RJ-11
Ethernet interface RJ-45
POTs interface RJ-11
Management 8-pin Din
Reliability
MTBF 700,000 hours
Physical Characteristics VDSL Interface
Dimensions 9.5cm x 10.9cm x 2.5cm
(W x D x H)
Weight 300g
Mounting Tabletop and rack-mountable*
* requires AT-MCR12 chassis
Environmental Specifications
Operating temp. 0°C – 40°C (32°F – 104°F)
Storage temp. -25°C to 70°C (-13°F to 158°F)
Relative humidity 5% to 95%, non-condensing
Operating altitude up to 10,000ft
Network management
GUI configuration tool
The subscriber unit can be remotely managed, down the
link, from the provider unit
Power Characteristics
External power supply 120V AC, 60Hz (US model)
240V AC, 50Hz
(European models)
Input supply voltage 12vDC
Max current 500mA
Power consumption 6W
Country of Origin
Singapore
Approvals
UL 1950
FCC Class B
CSA
EN 55022 Class B
EN 60950 (TUV)
EN 50082-1
|
|
|
| |
|
|
 |
 |
 |
 |
| Suscríbete a nuestro boletín informativo |
|
|
|
 |
 |
 |
 |
|
Ocasión
